寶源裝修工程 - 全板塊動效整合
BOUYUEN RENOVATION DESIGN

One-stop Solution
for Commercial Engineering and Licensing

From site evaluation, design blueprints, legal licensing, and construction to custom furniture and after-sales maintenance—helping you build your ideal commercial space while ensuring full legal compliance.

Our Commitment

Compliance First,
Design Follows

Ensuring every step stays within regulatory boundaries.

In Hong Kong, license application is often the most complex part of operating a restaurant or commercial venue. Baoyuan has over ten years of experience in licensing consultancy. From the FEHD and Buildings Department to the Fire Services Department, we are familiar with every approval process, ensuring you are fully prepared before opening without having to worry about regulatory hurdles.

Licensing Consultant

Licensing Consultant & Statutory Application

Familiar with the latest regulations of Hong Kong's FEHD, Buildings Department, and Fire Services Department, ensuring a smooth start for your business.

Ψ

Popular F&B Licenses

  • Restaurant License (General / Light Refreshment
  • Karaoke Establishment Permit
  • Factory Canteen Licence

Production & Manufacturing Licenses

  • Food Factory Licence
  • Bakery License
  • Milk Factory Licence
  • Frozen Confection Factory Licence
🏠

Retail & Special Permits

  • Fresh Provision Shop Licence
  • Siu Mei and Lo Mei Shop Licence
  • Food Shop Licence
  • Chinese Herb Tea Permit
📄

Plan Alteration & Administration

  • Alteration of Plans & Submission of Amendments
  • Transfer of License
  • UBW (Unauthorized Building Works) Certificates

All certificates are issued by government-recognized professionals (AP/RSE) with full legal validity.

Professional Certification

Authoritative Issuance

A promise of peace of mind, personally overseen by Authorized Persons (AP).

CERTIFICATION SERVICES

Issuance of Professional Certificates

Personally overseen by Authorized Persons (AP) and Registered Structural Engineers (RSE), issuing professional certificates with full legal validity.

Structure & Safety

  • √(AP/RSE) | Structural Engineer Certificate
  • √Minor Works Category 2 Submission
  • √Unauthorized Building Works
  • √Floor Loading Certificate
🛡️

Compliance Certificates
- A/B/C/D

  • √Certificate A —Hygiene Requirements
  • √Certificate B -Building Safety
  • √Certificate C -Fire Safety Requirements
  • √Certificate D -Ventilation Facilities
🔥

Fire Safety & Annual Inspection

  • √Fire Installations Certificates (FS251, 314A)
  • √Annual Fire Safety Inspection Report

Electrical, Mechanical & Gas

  • Work Safe Certificate of electrical installations (WR1)
  • √Annual Ventilation Inspection Certificate
  • √Gas/LPG Certification Documents
-

The Perfect Balance
of Aesthetics and Regulations

Right the first time, eliminating rework.

Our team integrates regulatory requirements into the design from the start to avoid costly reworks caused by non-compliance.

DESIGN & CONSTRUCTION

Design & Construction

Perfectly integrating design aesthetics with licensing regulations to avoid costly secondary alterations caused by non-compliant renovations.

👩‍🍳

F&B Space

Professional kitchen workflow planning, exhaust, and grease trap system design.

🏢

office

M&E cabling, fire partitions, and corporate branding spatialization.

🏠

Home

Personalized style customization, enhancing living functions.

From custom stainless steel kitchenware to commercial furniture, and from engineering maintenance to emergency repairs, Baoyuan provides a complete after-sales ecosystem. Furthermore, we proactively remind you to conduct annual fire safety and ventilation inspections to ensure your license remains valid, allowing you to focus on your business without any worries.

Worry-Free Throughout

Delivery is not the end, but the beginning.
Worry-free throughout.

A Commitment to Lifelong Aftercare

Custom Furniture & After-sales Maintenance

We don't just finish the renovation; we are responsible for your long-term user experience.

🛋️

Custom Commercial Steelware

Bespoke stainless steel kitchen equipment that meets hygiene standards.

🔧

Spatial Furniture

Custom display cabinets, storage systems, and office furniture made to the dimensions of the blueprints.

🔔

Rapid Repair

Emergency repair response for F&B clients to ensure uninterrupted business operations.

📅

Renewal Support

Proactive reminders for annual fire safety and ventilation inspections to ensure continuous compliance.

OPERATIONAL FLOW

Dual-Track Professional Workflow

Engineering Process

1.On-site Measurement
2.Design and Planning
3.Floor Plan Layout, Revision, and Confirmation
4.Material Selection and Budgeting
5.Contract Signing and Project Commencement
6.Customization of Kitchenware and Furniture
7.Cleaning and Inspection
8.Official Operation / Handover
9.Maintenance and Repair

1.Licensing Application Process

1.Submit License Application
2.Review of Design Plans (by Respective Government Departments)
3.On-site Inspection by Government Departments
4.FEHD Issues "Letter of Requirements"
5.Authorized Person (AP) Issues Certification
Provisional License
7.Completion of Renovation
8.Site Inspection to Verify Compliance
9.Official License Approval

丨Application for Licence丨

  • Certificate of unauthorized building works (UBW1 & UBW2)
  • Certificate of Compliance A (Health Requirements)
  • Certificate of Compliance B (Building Requirements)
  • Certificate of Compliance C (Fire Safety Requirements)
  • Certificate of Compliance D (Ventilation Requirements)
  • Annual certificates of ventilation and fire services installations
  • Work Safe Certificate of electrical installations (WR1)
  • Certificates of Compliance and Completion regarding gas installations
  • Fire Installations Certificates (FS251, 314A)

丨Alternation 丨

  • Handling of LICENCE Transfer and Relevant Supporting Documents UBW Certificates

丨Licence Consultant 丨

  • Restaurant License
  • Bakery License
  • Fridge Room License
  • Factory Canteen Licence
  • Food Factory Licence
  • Temporary Food Factory Licence
  • Fresh Provision Shop Licence
  • Frozen Confection Factory Licence
  • Milk Factory Licence
  • Siu Mei and Lo Mei Shop Licence
  • Food Shop Licence
  • Food Business Licence/Permit
  • Karaoke Establishment Permit
  • Chinese Herb Tea Permit
  • Restricted Food Permit
店鋪選址評估
Site Selection & Preparation

I. Site Selection & Preparation

Q1: I am planning to open a restaurant/shop. What hardware conditions should I pay the most attention to when selecting a site? +
A: Besides foot traffic and rent,hardware conditions and regulationsare crucial factors determining whether a license can be successfully issued for your business. We recommend paying special attention to the following:
  • Electricity and Plumbing:Is the three-phase power supply sufficient? Do the drainage pipes and grease trap meet the requirements of the Food and Environmental Hygiene Department (FEHD)?
  • Ventilation and Fire Safety:Does the building allow the installation of fresh air and exhaust systems? Does the fire safety equipment meet the standards?
  • Land Use Restrictions:Does the property's Occupation Permit (OP) allow the type of business you plan to operate?
💡 Bouyuen's Pro Tip:We strongly advise you to let us conduct an on-site evaluation before you formally "sign the lease." This ensures the premises meet the licensing requirements, preventing costly future renovation and licensing difficulties caused by renting the wrong location.
Q2: If I take over an existing restaurant, do I still need to reapply for a license? +
A: While taking over an old shop can save on renovation costs, you must confirm whether the previous owner's license can be smoothly transferred and whether the existing fire safety and ventilation systems still comply with the latest regulations. Bouyuen will assist you in inspecting the on-site E&M (Electrical and Mechanical) equipment and professionally handle the license transfer or new plan submission, ensuring a legal, compliant transition and smooth operation.
工程預算與報價
Budget & Quotation

II. Budget & Quotation

Q3: How should I estimate the renovation budget for a restaurant or shop? Are there any hidden fees? +
A: Commercial renovation budgets are mainly divided into four categories: "Hard Fit-out (Plumbing/Electrical/Masonry)", "HVAC and Fire Safety Systems", "Licensing Consultant Fees", and "Operational Equipment (e.g., stainless steel kitchenware)".

Bouyuen's greatest advantage is ourself-owned stainless steel kitchenware factory,allowing us to control costs directly from the source and save you middleman markups. We provide a clear, transparent, itemized list during the quotation stage with absolutely no hidden charges, ensuring every penny of your budget is well-spent.
Q4: Can I ask you to do an on-site inspection or provide a quote before I rent a shop? +
A: Absolutely! Bouyuen offersa free on-site measurement and preliminary quotation service.our professional team will tailor a preliminary plan that best meets food preparation efficiency and ergonomics.
牌照代辦與法規
Licensing & Compliance

III. Licensing & Compliance

Q5: How long does it usually take to apply for an FEHD restaurant license? Can you handle the whole process? +
A: Applying for a full license generally takes several months. However, to help you seize the prime business period, we will assist you in applying for"Provisional License"first. This is usually issued once basic fire safety and hygiene requirements are initially met, allowing you to start operating.

Bouyuen provides a one-stop licensing service. From conceptual layout plans and ventilation system installations to annual fire safety inspections, we are thoroughly familiar with all regulations and can effectively avoid the risk of licensing delays.
工期把控與售後服務
Timeline & After-sales

IV. Timeline & After-sales

Q6: How long is the renovation period? Can it be completed within the "rent-free period"? +
A: The specific timeline depends on the shop's size and project complexity. However, business owners can rest assured: Bouyuenpossesses profound expertise in E&M engineering,making us highly efficient in cross-trade coordination (such as plumbing, electricity, HVAC, masonry, and kitchenware installation).

We deeply understand the importance of the rent-free period to your revenue, so we strictly control the delivery schedule to help you complete the project swiftly and open on time.
Q7: After the project is completed, is there a maintenance service if I encounter sudden E&M issues? +
A: Certainly. Bouyuen provides a comprehensive "Full-Ecosystem After-Sales & Maintenance Mechanism". We are most proud of our strong capability inconcealed works (plumbing and electrical infrastructure),which can completely eliminate operational hazards like water leaks and power trips. Should you encounter any emergencies during business hours, we have a well-established emergency repair mechanism to be your strongest backing.
Other Services

V. Other Services

Q8: Besides restaurants and commercial shops, do you also take on office or residential renovation projects?
A: Yes! We not only specialize in F&B projects but also provide top-tier office and residential design services:

高級寫字樓設計

🏢 Office

We provide precise high/low voltage wiring and HVAC system planning with short construction cycles, comprehensively enhancing your corporate image and ensuring a seamless move-in.

奢華家居裝修設計

🏠 Home

Balancing aesthetics and practicality, we place special emphasis on the highly demanding "concealed plumbing and electrical works," ensuring your ideal home is not only beautiful but also completely safe and comfortable to live in.